Umbrella Marker (Set of 5) (#ACR-UM)
Designs are within 5cm x 5cm, one set of 5 with the same design.
Includes silicone rings in a choice of 8 colors and metal fittings in a choice of gold or silver.
Any color combination of rings and metal fittings is available. Please specify colors when ordering.
*Prices for Glitter and Aurora colors of acrylic plates are different.
Design size: W30mm x H30mm or larger to W50mm x H50mm or smaller
Thickness : 3mm
Composition : acrylic
*Silicon rings and metal fittings are not attached.
*The silicone ring is dyed.
Therefore, there is a possibility of color migration when rubbed against white objects.
Please avoid direct contact.
*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
This product is a set of 5 pieces per design.
*Different designs and colors cannot be combined within the set of 5.
Please note that if the resolution of the data is low or if the outline is anti-aliased, the opaque area will be judged as a design and a white plate will be generated for that area as well, so the white plate may be printed slightly larger than the outline of the design.
*White plates cannot reproduce translucent areas or gradations with transparency.
*The white plate and the color plate may deviate by about 0.1mm during the production process.
*Individual packaging is not available.
◾️The following acrylic plate colors are priced differently
Lame / Aurora Borealis / Holograms: listed price + ¥500
Price includes UV print processing cost (tax included).
◾️Optional extra charge
Gloss finish: 1,000 yen
Double-sided print: 1,000 yen
Clear overprint: 1,000 yen
Color mode of your submission: CMYK recommended (If you submit your design data in RGB, we will convert it, but the color will change slightly.)
*(If you are submitting design data in RGB, we will convert the data to RGB, but the colors will be slightly different.
We will do our best to accommodate submissions in formats other than those listed above, so please feel free to contact us.
We cannot print in gold, silver, or fluorescent colors.
We will print the design data as it is, but the color of the data and the finished product may differ slightly depending on the monitor and environment you are using.
(Thin lines of 0.3 mm or less may not be reproduced beautifully.
The color will be vividly reproduced by using a white plate and a color plate.
*When viewed from the reverse side, the white of the white plate is visible (for transparent materials).
*When printed without the white plate, the finish will be transparent and light-colored designs will be difficult to see.