This is a great value acrylic key holder creation plan that allows you to freely fill the A4 size. You can fill in as many designs as you like within the range, so you can create multiple types of your favorite designs in small lots and in any size you like. (*There is a recommended minimum size. This plan offers a high degree of flexibility, and depending on how you use it, it can be quite economical. *We can also accommodate designs without chain holes for acrylic stands, etc. *The red cut lines in the product image are for illustrative purposes only; cut lines will not be printed on the actual product. A simple ball chain with a ball diameter of 2.4mm is included. *One ball chain is included for each design with a hole. If you do not need it, please let us know when you submit your design. *To prevent rusting, some fine wood chips may be included. *Chain specifications are subject to change without notice due to performance improvement. *Plastic chains come with silver round cans. *We do not offer optional attachments. *Due to manufacturing reasons, the unevenness of the glitter particles on the printed surface may affect the glitter color of the acrylic board. Also, unevenness may affect the cut cross section of the acrylic board. Thank you for your understanding. Product Details Size: Any size can be processed as long as it is within W287mm x H200mm including the cut line. *Recommended minimum size is 30mm or larger. *Smaller designs less than 30mm will be handled irregularly, so please consult with us separately regarding production availability. The maximum number of pieces that can be laid out is 50. Thickness : 3mm Composition: acrylic*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
Please note that if the resolution of the data is low or if the outline is anti-aliased, the opaque area will be judged as a design and the white plate data will be generated for that area as well, resulting in the white plate being printed slightly larger than the outline of the design. *White plates cannot reproduce translucent areas or gradations with transparency. *The white version and the color version may deviate from each other by about 0.1mm during the production process. *Individual packaging is not available. ◾️The following acrylic sheet colors are priced differently ・Peach pink/lime green/red eye/midnight: Price listed +1000 yen See also here for UV print and acrylic products
Price includes UV print processing cost (tax included).
◾️ Ball chain can be changed to optional chain Color ball chain: 30 yen / piece Plastic chain: 30 yen / piece Nasukan: 30 yen ~ 50 yen / piece Aurora bead strap: 50 yen / piece ◾️ Other optional extra charge Gloss finish: 1,500 yen Double-sided print: 2,000 yen Clear overprint: 1,500 yen Acrylic clear pouch: 2,800 yen Acrylic clear pouch: 2,800 yen Peel off the film by yourself: -1,000 yen
Color mode : CMYK recommended (If you submit in RGB, we will convert it, but the color will change slightly) Submission format: PSD, AI, JPG, PNG, PDF, etc. (Resolution of 300 or higher recommended) (Resolution of 300 or higher recommended) *Illustrator, Photoshop, or other software is not required to submit design data. We will do our best to accommodate submissions in formats other than those listed above, so please feel free to contact us. *If you are submitting in Illustrator, you can use path data for cut lines and image data for the printed part. If you are not sure about the file format, please contact us. *If you are unable to create cutlines, we can also create cutlines if you leave it to us. We cannot print in gold, silver, or fluorescent colors. We will print your design data as it is, but the color of the finished product may differ slightly from the data depending on the monitor and environment you are using. Thin lines of 0.3 mm or less may not be reproduced beautifully. The color will be vividly reproduced by using a white plate and a color plate. *When viewed from the reverse side, the white of the white plate is visible (for transparent materials). *If printed without the white plate, it will look transparent and light-colored designs will be difficult to see. Only clear acrylic is printed from the reverse side. (The design will be visible through the acrylic.) About acrylic stand combinations If you are producing acrylic stands with multiple designs, please let us know the combination of the main body and pedestal. Please write it in the template or prepare a separate image of the combination. *April 22, 2025 Please use the latest submission template. Click here for submission template
If your order contains minor design differences, please share this information with us when you submit your data or place your order to prevent design differences during production and inspection.
Example of similar design
Please keep at least 5mm between cut lines. A minimum of 2.5mm is required between the cutline and the design.
The hole for the chain should be at least 3mm. (Ball diameter is 2.4mm) It is possible for us to make cut lines along the design. In this case, we will make the cutline 2.5mm outward from the design. *Please let us know the position of the hole for the chain (e.g., above the character's head, etc.). Please note that we may need to adjust the cutline if it is less than 2.5mm from the design.
A minimum of 2.5mm is required between the cutline and the design.
Printing without a white plate will result in a translucent finish, making light-colored designs difficult to see. If you want a transparent finish, we recommend processing without a white plate.
Printing without a white plate will result in a translucent finish, making it difficult to see light-colored designs.
If not specified, the entire design will be covered. If you wish to specify the area to be gloss processed, please prepare a gloss layer. *Normally, clear acrylic is printed from the reverse side, but in the case of gloss processing, we will print from the front side even on clear acrylic.
①Acrylic ②Design of the FRONT side ③White base, ④Design of on the BACK side and ⑤Gloss cover are printed, so the back side will have a glossy finish. There is a possibility that minute air bubbles may appear in the finished product. Please understand in advance that it is difficult to prevent bubbles completely in the process.
We offer double-sided printing (3-layer printing) for clear acrylic only. Three layers are printed on one side in the following order: color, white, and color. The print on the front side is visible through the acrylic. Please create the design data so that the design on the front side and the back side overlap exactly when reversed. Please be careful to place text, logos, etc. so that they are readable when viewed from each side. (*Please note that due to the nature of printers, there may be a 0.1mm gap between the print on the front and back sides. *If there is a light-colored design or watermark, there is a possibility that the opposite side will show through.
Payment can be made by bank transfer. Only for orders from overseas, we accept payment with PayPal.
If the product you receive does not meet your expectations, please read the following and contact us within 7 days of receipt of the product. We will re-create the product or refund your money if the problem is caused by our defect.
Basically, Sagawa Express is the only shipping company. The shipping fee is 1,000 yen per package (regardless of the product or quantity). Second and subsequent delivery locations can be specified for an additional charge of 1,000 yen each.
If you have any questions, please feel free to contact us.
