Set of 5 acrylic stands with design within 50mm x 50mm and thickness of 3mm. Can be made in small lots of 5 pieces for 500 yen per piece. Please choose from round, oval, square, star, heart, and puzzle shapes for the base. *Prices for lame colors, aurora borealis colors, and holograms on acrylic sheets vary. Product Details Maximum finished size: W55mm x H55mm (including cut line *not including the convex part to be inserted into the base) Design size: W30mm x H30mm or larger to W50mm x H50mm or smaller Pedestal portion 44mm x 44mm Thickness : 3mm Composition : acrylic*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
This product is a set of 5 pieces per design. *Different designs and colors cannot be combined within the set of 5. Please note that if the resolution of the data is low or if the outline is anti-aliased, the opaque area will be judged as a design and a white plate will be generated for that area as well, so the white plate may be printed slightly larger than the outline of the design. *White plates cannot reproduce translucent areas or gradations with transparency. *The white plate and the color plate may deviate by about 0.1mm during the production process. *Individual packaging is not available. ◾️The following acrylic plate colors are priced differently Lame / Aurora Borealis / Holograms: listed price + ¥500 See also here for UV print and acrylic products
Price includes UV print processing cost (tax included).
◾️Optional extra charge Gloss finish: 1,500 yen Double-sided print: 1,000 yen Clear overprint: 1,500 yen
Color mode : CMYK recommended (If you submit in RGB, we will convert the color, but the color will change slightly) Submission format : PSD, AI, JPG, PNG, PDF, etc. (Resolution of 300 or higher recommended) (Resolution of 300 or higher recommended) *Illustrator, Photoshop, or other software is not required to submit design data. We will do our best to accommodate submissions in formats other than those listed above, so please feel free to contact us. *If you are submitting in Illustrator, you can use path data for the cut lines and image data for the printing part. If you are not familiar with the file format, please contact us. *If you are not able to create cutlines, we will create them if you leave it to us. We cannot print in gold, silver, or fluorescent colors. We will print the design data as it is, but the color of the data and the finished product may differ slightly depending on the monitor and environment used. (Thin lines of 0.3 mm or less may not be reproduced beautifully. The color will be vividly reproduced by using a white plate and a color plate. *When viewed from the reverse side, the white of the white plate is visible (for transparent materials). *If printed without the white plate, it will be transparent and light-colored designs will be difficult to see. Only clear acrylic is printed from the reverse side. (The design will be visible through the acrylic.) Click here for submission template
A minimum of 2.5mm is required between the cutline and the design.
During the data check, we will revise the data when it is found that it does not fit into the slot of the acrylic stand. Please understand that if the fit is too tight, the acrylic surface may be damaged, so the data will be adjusted with some leeway.
Printing without a white plate will result in a translucent finish, making light-colored designs difficult to see. If you want a transparent finish, we recommend processing without a white plate.
Printing without a white plate will result in a translucent finish, making it difficult to see light-colored designs.
If not specified, the entire design will be covered. If you wish to specify the area to be gloss processed, please prepare a gloss layer. *Normally, clear acrylic is printed from the reverse side, but in the case of gloss processing, we will print from the front side even on clear acrylic.
①Acrylic ②Design of the FRONT side ③White base, ④Design of on the BACK side and ⑤Gloss cover are printed, so the back side will have a glossy finish. There is a possibility that minute air bubbles may appear in the finished product. Please understand in advance that it is difficult to prevent bubbles completely in the process.
We offer double-sided printing (3-layer printing) for clear acrylic only. Three layers are printed on one side in the following order: color, white, and color. The print on the front side is visible through the acrylic. Please create the design data so that the design on the front side and the back side overlap exactly when reversed. Please be careful to place text, logos, etc. so that they are readable when viewed from each side. (*Please note that due to the nature of printers, there may be a 0.1mm gap between the print on the front and back sides. *If there is a light-colored design or watermark, there is a possibility that the opposite side will show through.
Payment can be made by bank transfer. Only for orders from overseas, we accept payment with PayPal.
If the product you receive does not meet your expectations, please read the following and contact us within 7 days of receipt of the product. We will re-create the product or refund your money if the problem is caused by our defect.
Basically, Sagawa Express is the only shipping company. The shipping fee is 1,000 yen per package (regardless of the product or quantity). Second and subsequent delivery locations can be specified for an additional charge of 1,000 yen each.
If you have any questions, please feel free to contact us.
