Enamel Pins 50mm x 50mm or Less (Set of 50) (#ENA-P50)
The pins are sturdily made, have good ink coloring, and can be made in small lots of 50 pieces per design for a low price.
They can be attached to various items such as outerwear, caps, bags, and other accessories, and are recommended as one-point items.
30mm size is also available.
Minimum processing size : 10mm x 10mm or more
You can choose from the following 4 types of material colors.
GOLD
NICKEL
ROSE GOLD
DYED BLACK
You can choose from the following 4 types of attachments.
Butterfly clutches
Deluxe clutches
Screw clutches
Safety pins
*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
This product is made with the same design and cannot be combined with different designs.
Due to the nature of the product and the fact that it is made at an overseas factory, there may be individual differences in the finished product, such as slight scratches, dents, ink overflows, and bent pins.
In addition, due to the production process, there may be slight differences from the finish of the previous order, even in the case of additional orders of the same design. After inspection by our company, we may deliver the product as acceptable.
We plan to deliver the product with a small amount of spare parts, so in the unlikely event that a defective product is produced, we would appreciate it if you could forgive us if the defective product is within the amount of the spare parts.
If there are more defective items than the reserve quantity, we would be happy to refund at the unit price per item.
[About the position of attachments]
The position and orientation of attachments cannot be specified. Please understand that we will leave it to you to decide on the best balance.
Also, depending on the design and size, two attachments may be attached in order to maintain balance during installation. Please understand this in advance.
*The attachment specifications are subject to change without notice.
[About delivery date].
Please allow 6 weeks from the time of payment to the time of delivery for this product due to its production at an overseas factory.
Please understand in advance that there is a possibility that there will be a delay in receiving the product.
This product can only be ordered as a single item.
*It cannot be bundled with other processed products.
1 design Price includes mold and processing costs (tax included).
Please specify up to 4 colors.
Please specify up to 4 colors. We will use colors that are similar to the data you submitted.
*Please note that there is a possibility that the colors may differ from the colors in the data.
*It is also possible to specify colors in PANTONE C.
Since this product is created by stamping a metal plate to form raised and recessed areas and then filling the recessed areas with ink, each ink color must be completely surrounded by a raised border.
Therefore, it is not possible to place ink colors side by side without borders or to create gradients.
We would appreciate it if you could consider designs where each color boundary is clearly outlined with a border.
Please note that fine lines thinner than 0.5 mm may appear thicker or become smudged.
Additionally, we may need to make minor adjustments to your design data—such as the size or aspect ratio—to ensure it can be processed during production.
Please be aware that the final product may differ slightly from the digital design.
We recommend submitting design files in Illustrator format.
However, it is not a problem if you do not have software such as Photoshop (300 dpi or higher recommended). We accept PDFs, JPEGs, PNGs, and even hand-drawn sketches.
Click here for submission template