[Stock Only] Tyvek Convenience Bag (#TYV-CB)

Please note that if the resolution of the data is low, or if the outline is anti-aliased, the opaque area will be judged as a design, and the white plate data will be generated for that area as well.
*White plates cannot reproduce translucent areas or gradations with transparency.
*Please note that the print position may deviate slightly due to the production process, and that the print may be a little rough due to the uneven nature of the material.
The coloring of brown in particular will be a bit grainy.

Price includes UV print processing cost (tax included).

This product can be converted to Embroidery.
・Change to Embroidery: display price + 600 yen (after 2nd location + 800 yen)

*Please note that the amount may vary.
*Additional charges may be incurred for other designs, etc.

After placing your order, you will receive an e-mail from us.

For more information, please refer to the following pages.
・Embroidery

◾️ Embroidery Glitter Sheet
For additional glitter sheets: +500 yen
Glitter sheets allow for extensive multi-colored, glossy markings that cannot be achieved with direct embroidery of glittery lame materials.

All measurements in the size chart are taken by placing the garment flat on the table, but there may be slight errors or individual differences depending on the product and production lot.
In addition, for items that have been converted from inch measurements, there may be an error of approximately 2.5cm to 5cm due to differences in measurement methods and individual differences.
Please understand that the error is to be considered as a rough guide only.
Please note that sizes and colors may change without prior notice from the supplier.

Color mode of your submission: CMYK recommended (If you submit your design data in RGB, we will convert it, but the color will change slightly.)
*(If you are submitting design data in RGB, we will convert the data to RGB, but the colors will be slightly different.
We will do our best to accommodate submissions in formats other than those listed above, so please feel free to contact us.

We cannot print in gold, silver, or fluorescent colors.
We will print the design data as it is, but the color of the data and the finished product may differ slightly depending on the monitor and environment you are using.
(Thin lines of 0.3 mm or less may not be reproduced beautifully.

The color will be vividly reproduced by using a white plate and a color plate.
*When viewed from the reverse side, the white of the white plate is visible (for transparent materials).
*When printed without the white plate, the finish will be transparent and light-colored designs will be difficult to see.