Handling precautions for polyester materials
Polyester products may bleed due to the characteristics of the dyes used in the printing and thermal processing, as well as the storage environment and conditions.

Handling Precautions for Inkjet Printing] This product has a bad fixation of pre-treatment agent.
This product is not compatible with inkjet printing due to poor fixation of the pretreatment agent.

Price includes silk screen printing processing cost (tax included).
*Free of charge for 10 or more prints (1,900 yen will be added for 9 or less prints)

This product can be converted to Embroidery or DTF Print.
・Change to Embroidery: display price + 600 yen (after 2nd location + 800 yen)
・Change to DTF Print: display price + 600 yen (after 2nd location + 800 yen)

*Please note that the amount may vary.
*Additional charges may be incurred for other designs, etc.

After placing your order, you will receive an e-mail from us.

For more information, please refer to the following pages.
・Silkscreen Printing
・Embroidery
・DTF Printing

Please choose from polyester ink.
*Not available in multiple colors, one-color prints only.

If you wish to change the ink color for the same design, a color change fee of 900 yen per color will be added.
*The color change fee will be waived for a minimum of 10 copies of each color per design

For more information, please refer to the following pages.
Silkscreen Ink Colors

◾️ Embroidery Glitter Sheet
For additional glitter sheets: +500 yen
Glitter sheets allow for extensive multi-colored, glossy markings that cannot be achieved with direct embroidery of glittery lame materials.

◾️Appliqué Embroidery (Reflector / PU Leather)
Appliqué Embroidery (Reflector / PU Leather) Additional: +¥1,000
(Additional ¥1,000 for each additional size)

Using reflective sheets (retroreflective materials that reflect light back toward the light source) or PU leather sheets allows for marking over a wider area than is possible with direct embroidery.

*The minimum line width around the perimeter of the reflector must be 2mm or more.
*The line width must be constant (for example, 2mm, it will be fixed at 2mm).

ou do not need to have Illustrator or Photoshop software to submit design data.
Basically, Illustrator data, Photoshop data, JPEG, PNG, PDF, handwritten manuscripts, etc. are all acceptable.
If you are not familiar with file formats, please contact us.
Basically, large, full-size images are fine.