Handling Precautions for Products for Babies
The safety of the materials used in our products for babies (90cm and under) has been confirmed by an inspection agency. However, depending on the processing conditions and storage conditions, formaldehyde may be transferred to the product.
Please be careful not to use printed materials containing formaldehyde during processing and to keep the products sealed and away from the open air when storing them.

Price includes silk screen printing processing cost (tax included).
*Free of charge for 10 or more prints (1,900 yen will be added for 9 or less prints)
250 yen will be added for each additional edition (1 color or 1 location).

This product can be converted to Inkjet Print or Embroidery.
・Change to Inkjet Print: display price + 400 yen (after 2nd location + 600 yen)
・Change to Embroidery: display price + 600 yen (after 2nd location + 800 yen)

*Please note that the amount may vary.
*Additional charges may be incurred for other designs, etc.

After placing your order, you will receive an e-mail from us.

For more information, please refer to the following pages.
・Silkscreen Printing
・Inkjet Printing
・Embroidery

Please choose from our standard inks.
250 yen will be added for each additional color.

If you wish to change the ink color for the same design, a color change fee of 900 yen per color will be added.
*The color change fee will be waived for a minimum of 10 sheets of each color per design.

For more information, please refer to the following pages.
Silkscreen Ink Colors

◾️ Inkjet print dark color treatment
Dark color treatment: +600 yen per spot

◾️ Embroidery Glitter Sheet
For additional glitter sheets: +500 yen
Glitter sheets allow for extensive multi-colored, glossy markings that cannot be achieved with direct embroidery of glittery lame materials.

◾️Appliqué Embroidery (Reflector / PU Leather)
Appliqué Embroidery (Reflector / PU Leather) Additional: +¥1,000
(Additional ¥1,000 for each additional size)

Using reflective sheets (retroreflective materials that reflect light back toward the light source) or PU leather sheets allows for marking over a wider area than is possible with direct embroidery.

*The minimum line width around the perimeter of the reflector must be 2mm or more.
*The line width must be constant (for example, 2mm, it will be fixed at 2mm).

デザインデータのご入稿はIllustratorやPhotoshopなどのソフトがなくても問題ありません。
基本的にIllustratorデータ、Photoshopデータ、JPEG、PNG、PDF、手書き原稿等 なんでもOKです。
ファイル形式がよくわからないといった方もご相談ください。
基本的に原寸の大きめの画像であれば大丈夫です。