Washing precautions
Washing BLACK body with white clothing may cause pink color migration. We cannot guarantee the color transfer caused by washing, so please be careful when washing.

Price includes silk screen printing processing cost (tax included).
*Free of charge for 10 or more prints (1,900 yen will be added for 9 or less prints)
250 yen will be added for each additional edition (1 color or 1 location).

This product can be converted to Inkjet Print or Embroidery or DTF Print.
・Change to Inkjet Print: display price + 400 yen (after 2nd location + 600 yen)
・Change to Embroidery: display price + 600 yen (after 2nd location + 800 yen)
・Change to DTF Print: display price + 600 yen (after 2nd location + 800 yen)

*Please note that the amount may vary.
*Additional charges may be incurred for other designs, etc.

After placing your order, you will receive an e-mail from us.

For more information, please refer to the following pages.
・Silk screen Printing
・Inkjet Printing
・Embroidery
・DTF Printing

Please choose from our standard inks.
250 yen will be added for each additional color.

If you wish to change the ink color for the same design, a color change fee of 900 yen per color will be added.
*The color change fee will be waived for a minimum of 10 sheets of each color per design.

For more information, please refer to the following pages.
Silk screen printing ink color table

◾️ Inkjet print dark color treatment
Dark color treatment: +600 yen per spot

◾️ Embroidery Glitter Sheet
For additional glitter sheets: +500 yen
Glitter sheets allow for extensive multi-colored, glossy markings that cannot be achieved with direct embroidery of glittery lame materials.

◾️DTF Glitter Printing
To change to glitter print: Add ¥1,000 to the DTF print price.
*Glitter print is a special process using DTF technology.

◾️Appliqué Embroidery (Reflector / PU Leather)
Appliqué Embroidery (Reflector / PU Leather) Additional: +¥1,000
(Additional ¥1,000 for each additional size)

Using reflective sheets (retroreflective materials that reflect light back toward the light source) or PU leather sheets allows for marking over a wider area than is possible with direct embroidery.

*The minimum line width around the perimeter of the reflector must be 2mm or more.
*The line width must be constant (for example, 2mm, it will be fixed at 2mm).

◾️DTF Foil Printing
Changing to foil printing: Add ¥1,000 to the DTF print price.
*You can choose from two foil colors: gold or silver. Please specify your desired foil color when submitting your print.
*Foil printing is a special process using DTF.

◾️DTF Oversized Print
If you choose the oversized print option: DTF print price + 1,000 yen
This is the largest print size available among our processing options, including screen printing and inkjet printing.
Since you can print right up to the edges of the T-shirt, you can use your favorite shirt to create a striking, original T-shirt.

All measurements in the size chart are taken by placing the garment flat on the table, but there may be slight errors or individual differences depending on the product and production lot.
In addition, for items that have been converted from inch measurements, there may be an error of approximately 2.5cm to 5cm due to differences in measurement methods and individual differences.
Please understand that the error is to be considered as a rough guide only.
Please note that sizes and colors may change without prior notice from the supplier.

An additional charge (size up charge) will be added per piece for sizes XXL (2XL) and larger, and an additional 250 yen will be added to the listed price for each additional size.

You do not need to have Illustrator or Photoshop software to submit design data.
Basically, Illustrator data, Photoshop data, JPEG, PNG, PDF, handwritten manuscripts, etc. are all acceptable.
If you are not familiar with file formats, please contact us.
Basically, large, full-size images are fine.