Based on the popular Colt Paterson Unstructure 6-panel Cap (part number CP001), this is a peach skin cap made of raised polyester. The depth is slightly shallower than CP001, and the 6-stitch brim is slightly smaller to give a more compact impression. The thin fabric is soft to the touch, so it can be worn with a high sense of fit. The chrysanthemum holes and dotted buttons are also in the same color, providing just the right amount of accent. The straps and sweat-absorbing tape on the back, which can be stored inside, are made of the same fabric as the crown. [ Colt Paterson ] This is an original headwear brand produced by the staff of CORNER PRINTING, who have been involved in the production of many blank bodies. The aim is to develop basic products that are not found in ready-made products, with the premise of applying secondary processing such as printing and embroidery. Product Details Composition : 100% polyester 6 panels Height : 12cm Brim length : 7cm Brim width: 18cm Head circumference (min - max): 54 - 59cm*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
Price includes embroidery processing (tax included).800 yen will be added for each additional embroidery.For more information, please refer to the following pages. ・Embroidery
◾️3D Embroidery・Upgrade to 3D embroidery: +500 yenWe offer 3D embroidery. By inserting urethane material into the embroidery, we create a three-dimensional finish.*The embroidery thread color for the 3D embroidery area is limited to one color. For designs with two or more colors, only one of those colors will be used for the 3D embroidery.*We recommend simple, bold text rather than complex designs for 3D embroidery.*3D embroidery is available only on the front.*Due to material limitations, gold (MG2), silver (MS1), glow-in-the-dark, and aluminum-based threads are not compatible with 3D embroidery.*If the line width of the design itself is between 5mm and 20mm, and there is not at least 3mm of space between elements within the design, we may be unable to accept it for 3D embroidery.◾️Appliqué Embroidery (Reflector / PU Leather)Appliqué Embroidery (Reflector / PU Leather) Additional: +¥1,000(Additional ¥1,000 for each additional size)Using reflective sheets (retroreflective materials that reflect light back toward the light source) or PU leather sheets allows for marking over a wider area than is possible with direct embroidery.*The minimum line width around the perimeter of the reflector must be 2mm or more.*The line width must be constant (for example, 2mm, it will be fixed at 2mm).
All measurements in the size chart are taken by placing the garment flat on the table, but there may be slight errors or individual differences depending on the product and production lot. In addition, for items that have been converted from inch measurements, there may be an error of approximately 2.5cm to 5cm due to differences in measurement methods and individual differences. Please understand that the error is to be considered as a rough guide only. Please note that sizes and colors may change without prior notice from the supplier.
You do not need to have Illustrator or Photoshop software to submit design data. Basically, Illustrator data, Photoshop data, JPEG, PNG, PDF, handwritten manuscripts, etc. are all acceptable. If you are not familiar with file formats, please contact us. Basically, large, full-size images are fine.
Payment can be made by bank transfer. Only for orders from overseas, we accept payment with PayPal.
If the product you receive does not meet your expectations, please read the following and contact us within 7 days of receipt of the product. We will re-create the product or refund your money if the problem is caused by our defect.
Basically, Sagawa Express is the only shipping company. The shipping fee is 1,000 yen per package (regardless of the product or quantity). Second and subsequent delivery locations can be specified for an additional charge of 1,000 yen each.
If you have any questions, please feel free to contact us.
