Hotel key holder (Set of 5) (#HKH-5)
It is a cute key holder as a standard item with the revival boom trend.
Printing can be done on acrylic 1cm square key holders.
The transparency of acrylic allows for beautiful colors.
A simple ball chain with a ball diameter of 2.4 mm is included.
*Fine wood chips are included to prevent rusting.
*Chain specifications are subject to change without notice due to performance improvement, etc.
*Only the luminescent type glows in the dark.
*There will be a set of 5 pieces of the same color (same design).
*The product itself may have some dirt or scratches from the original.
Composition : Acrylic
*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
This product is a set of 5 per design.
*Different designs and colors cannot be combined in a set of 5.
Please note that if the resolution of the data is low or if the outline is anti-aliased, the opaque area will be judged as a design and the white plate data will be generated for that area as well, so the white plate may be printed slightly larger than the outline of the design.
*White plates cannot reproduce translucent areas or gradations with transparency.
*Please note that there may be slight deviations in the print position due to the production process.
*Individual packaging is not available.
Price includes UV print processing cost (tax included).
◾️ Add the following options
Colored ball chain: 30 yen / piece
D-can: 100 yen / piece
*Please ask us how many you need when you place your order.
*Only the D-can will be attached by us.
Color mode of your submission: CMYK recommended (If you submit your design data in RGB, we will convert it, but the color will change slightly.)
*(If you are submitting design data in RGB, we will convert the data to RGB, but the colors will be slightly different.
We will do our best to accommodate submissions in formats other than those listed above, so please feel free to contact us.
We cannot print in gold, silver, or fluorescent colors.
We will print the design data as it is, but the color of the data and the finished product may differ slightly depending on the monitor and environment you are using.
(Thin lines of 0.3 mm or less may not be reproduced beautifully.
The color will be vividly reproduced by using a white plate and a color plate.
*When viewed from the reverse side, the white of the white plate is visible (for transparent materials).
*When printed without the white plate, the finish will be transparent and light-colored designs will be difficult to see.
Click here for submission template