This is a woven name tag that can be sewn onto original products. Since they are made by weaving threads, they are three-dimensional, thick, and have a luxurious finish. We can create name tags in small lots at low prices, with a minimum quantity of 100 tags per design. It can be used as a brand tag or a pith name, and can be sewn on various apparel items such as caps, bags, T-shirts, and outerwear. Product Details Material : Polyester*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
This product is a set of 100 sheets per design. Different designs cannot be combined in a set of 100. [Woven Yarn Color] You can select up to 5 colors including the tag base color. We will produce the product in colors similar to those of the submitted data. (If there is no woven yarn available for a certain color, we will change to a color close to the original. The actual color may look different from the color in the data due to the luster of the yarn, the overlap, and the weaving method. We cannot specify the yarn color, weaving method, etc. If the tag base color is not specified or only the design is submitted, the tag base color will be white or black. [Cutting method] End hold ( A / B / C / D / E ) Both ends of the tag are folded over. The cost for folding the ends (the folded parts on the left and right ends) and heat-cutting both ends is included in the price. Please note that the cut lines may deviate by a few millimeters at both ends. The sewing method can be specified from the following two patterns. Two-sided stitching on both sides Stitching on four sides Center hold ( F / G / H ) The center fold is folded twice in the center. Both ends are also folded. The center (center folded part) and end folds and heat cutting at both ends are included in the price. Please note that the cut lines may deviate by a few millimeters at both ends. The sewing method can be specified from the following two patterns. Stitching on one side of the top edge Stitching on all four sides Straight cut ( I / J / K ) Straight-cut type is a heat-cut specification without a fold allowance. It can be installed in a wide range of applications. Heat cutting fee is included. The cut line may have a deviation of a few mm at both ends. The sewing method can be specified from the following 4 patterns. Stitching on one side of the top edge Top and bottom two-sided stitching Two side stitches on both sides Stitching on all four sides [About delivery] We are planning to deliver the products with some spare parts, so if there are any defective products, we would be grateful if you could forgive us if the number of defective products is within the amount of the spare parts. If there are more defective items than the reserve quantity, we would be happy to refund at the unit price per piece. [About delivery time]. Please allow 6 weeks from the time of payment to the time of delivery for the production of this product at our overseas factory. If you would like us to sew on the tags, please allow 7 weeks for delivery. *This may vary depending on circumstances, such as delays in the delivery of tags.
Price includes product and processing fees (tax included).*We can also produce and deliver tags only.
◾️ Sewing On A TagSewing process 1 piece: 120 yenFor more information, please refer to the following pages. Sewing The Label
Finished size (workable range) [A] W50mm x H15mm (W45mm x H10mm) [B] W50mm × H20mm (W45mm × H15mm) [C] W60mm x H20mm (W55mm x H15mm) [D] W50mm x H30mm (W45mm x H25mm) [E] W60mm × H30mm (W55mm × H25mm) [F] W35mm × H80mm (W30mm × H30mm) [G] W15mm × H40mm (W10mm × H10mm) [H] W40mm × H100mm (W35mm × H40mm) [I] W65mm × H55mm (W60mm × H50mm) [J] W70mm × H70mm (W65mm × H65mm) [K] W70mm × H50mm (W65mm × H45mm) *There may be an error of a few millimeters. *The length of the end (the part folded back on both ends) cannot be specified. *Straight cut type does not have a fold allowance, and is heat-cut on the left and right sides, top and bottom, or all four sides. Color mode: RGB recommended Please note that thin lines of 1mm or less may cause line rattling due to the nature of the weave. In addition, we may fine-tune the design size and other data to enable processing. Please understand that there is a possibility that the finished product may differ slightly from the data and the actual product. If the tag base color is not specified or only the design is submitted, the tag base color will be white or black. Please submit the tag base and design on separate layers. Illustrator (color mode RGB) is recommended for design data submission. Any PDF, JPEG, PNG, or handwritten data is acceptable. Click here for submission template
Payment can be made by bank transfer. Only for orders from overseas, we accept payment with PayPal.
If the product you receive does not meet your expectations, please read the following and contact us within 7 days of receipt of the product. We will re-create the product or refund your money if the problem is caused by our defect.
Basically, Sagawa Express is the only shipping company. The shipping fee is 1,000 yen per package (regardless of the product or quantity). Second and subsequent delivery locations can be specified for an additional charge of 1,000 yen each.
If you have any questions, please feel free to contact us.
