Acrylic hair clips (W70mm x H50mm or less) (set of 3) that can be made in any design you like. Of course, you can use them to hold your hair in place. This item is highly recommended as a gift or novelty item, as well as a point of reference for caps, bags, and other accessories. Product Details Maximum finished size : W75mm x H55mm (including cut line) Minimum recommended design size : W50mm x H25mm or more (including cut line) Clip body size : W66mm x H8mm Thickness : 3mm Composition : acrylic*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
This product is a set of 3 per design. (*It is not possible to combine different designs or colors within a set of three. Please note that if the resolution of the data is low or if the outline is anti-aliased, the opaque area will be judged as a design and a white plate will be generated for that area as well, so the white plate may be printed slightly larger than the outline of the design. *White plates cannot reproduce translucent areas or gradations with transparency. *Please note that there may be slight deviations in the print position due to the production process. *We do not offer individual packaging. *The hair clip on the back is generally attached in the center position. There may be an error of a few millimeters during mass production or additional production.Also, the adhesive will extend a few millimeters beyond the hair clip. Please be aware of this in advance. *The adhesive part of the lame plate may show through. Please understand this in advance. ◾️The colors of the following acrylic plates are priced differently Lame board: Price shown +500 yen See also here for UV print and acrylic products
Price includes UV print processing cost (tax included).
Color mode : CMYK recommended (If you submit in RGB, we will convert the color, but the color will change slightly) Submission format: PSD, AI, JPG, PNG, PDF, etc. (Resolution of 300 or higher recommended) (Resolution of 300 or higher recommended) *Illustrator, Photoshop, or other software is not required to submit design data. We will do our best to accommodate submissions in formats other than those listed above, so please feel free to contact us. *If you are submitting in Illustrator, you can use path data for the cut lines and image data for the printed part. If you are not sure about the file format, please contact us. *If you are unable to create cutlines, we can also create cutlines if you leave it to us. We cannot print in gold, silver, or fluorescent colors. We will print your design data as it is, but the color of the finished product may differ slightly from the data depending on the monitor and environment you are using. Thin lines of 0.3 mm or less may not be reproduced beautifully. The color will be vividly reproduced by using a white plate and a color plate. *When viewed from the reverse side, the white of the white plate is visible (for transparent materials). *If printed without the white plate, it will look transparent and light-colored designs will be difficult to see.
A minimum of 2.5mm is required between the cutline and the design.
The hole for the chain should be at least 3mm. (Ball diameter is 2.4mm) It is possible for us to make cut lines along the design. In this case, we will make the cutline 2.5mm outward from the design. *Please let us know the position of the hole for the chain (e.g., above the character's head, etc.). Please note that we may need to adjust the cutline if it is less than 2.5mm from the design.
Printing without a white plate will result in a translucent finish, making light-colored designs difficult to see. If you want a transparent finish, we recommend processing without a white plate.
Printing without a white plate will result in a translucent finish, making it difficult to see light-colored designs.
Payment can be made by bank transfer. Only for orders from overseas, we accept payment with PayPal.
If the product you receive does not meet your expectations, please read the following and contact us within 7 days of receipt of the product. We will re-create the product or refund your money if the problem is caused by our defect.
Basically, Sagawa Express is the only shipping company. The shipping fee is 1,000 yen per package (regardless of the product or quantity). Second and subsequent delivery locations can be specified for an additional charge of 1,000 yen each.
If you have any questions, please feel free to contact us.
