[Bulk Discount] Acrylic Key Ring 5cm x 5cm or Less (Set of 100) (#ACR-K05_100)

44colors / 1sizes available

This is a set of 100 acrylic key rings with a design within 50mm and 3mm thickness.
The price is 5,000 yen less than if you order 10 sets of 10.
This is recommended for large lot orders!
*One set with the same design.

We also offer gloss processing!
Only clear acrylic, double-sided printing and clear overprinting are also available!
Includes a simple ball chain with a ball diameter of 2.4mm.
*Fine wood chips are included to prevent rusting.
*Chain specifications are subject to change without notice due to performance improvement, etc.

The ball chain can be changed to a clasp, plastic chain, or colored ball chain as an option.
Please request the required number of chains when you place an order.
*Plastic chain comes with a silver round can.
*We do not attach the clasp.

*Prices for lame colors, aurora borealis colors, and holograms on acrylic sheets vary. Product Details Finished maximum size : W55mm x H55mm (including cut line *not including the size of the hole through which the ball chain is threaded)
Design size : W30mm x H30mm or larger to W50mm x H50mm or smaller

Thickness : 3mm
Composition : Acrylic

*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.

Select Color

Select Quantity

NOTES

This product is a set of 100 pieces per design.
*Different designs and colors cannot be combined within a set of 100 pieces.

Please note that if the resolution of the data is low or if the outline is anti-aliased, the opaque area will be judged as a design and the white plate data will be generated for that area as well, so the white plate may be printed slightly larger than the outline of the design.

*White plates cannot reproduce translucent areas or gradations with transparency.
*Please note that there may be slight deviations in the print position due to the production process.
*Individual packaging is not available.

◾️The following acrylic plate colors are priced differently
Lame / Aurora / Hologram: listed price +5,000 yen
See also here for UV print and acrylic products

Processing Methods and Prices

Price includes UV print processing cost (tax included).

Options

◾️The ball chain can be changed to an optional chain
Color ball chain: 30 yen / piece
Plastic chain: 30 yen / piece
Nasukan: 30 yen ~ 50 yen / piece
Aurora bead strap: 50 yen / piece

◾️ Other optional extra charge
Gloss finish: 5,000 yen
Double-sided print: 5,000 yen
Clear overprint: 5,000 yen
Peel off the film by yourself: -2,000 yen

About Submission

Color mode : CMYK recommended (If you submit in RGB, we will convert the color, but the color will change slightly)
Submission format : PSD, AI, JPG, PNG, PDF, etc. (Resolution of 300 or higher recommended)
(Resolution of 300 or higher recommended) *Illustrator, Photoshop, or other software is not required to submit design data.
We will do our best to accommodate submissions in formats other than those listed above, so please feel free to contact us.
*If you are submitting in Illustrator, you can use path data for the cut lines and image data for the printing part.
If you are not familiar with the file format, please contact us.
*If you are not able to create cutlines, we will create them if you leave it to us.

We cannot print in gold, silver, or fluorescent colors.
We will print the design data as it is, but the color of the data and the finished product may differ slightly depending on the monitor and environment used.
(Thin lines of 0.3 mm or less may not be reproduced beautifully.

The color will be vividly reproduced by using a white plate and a color plate.
*When viewed from the reverse side, the white of the white plate is visible (for transparent materials).
*If printed without the white plate, it will look transparent and light-colored designs will be difficult to see.

Size of this product: 5cm x 5cm or less (+ 2.5mm cut line).

Cutline

A minimum of 2.5mm is required between the cutline and the design.

The hole for the chain should be at least 3mm. (Ball diameter is 2.4mm)
It is possible for us to make cut lines along the design. In this case, we will make the cutline 2.5mm outward from the design.
*Please let us know the position of the hole for the chain (e.g., above the character's head, etc.).
Please note that we may need to adjust the cutline if it is less than 2.5mm from the design.

【大口割】アクリルキーホルダー (5cm×5cm以内) (100個セット) (品番ACR-K05_100)

A minimum of 2.5mm is required between the cutline and the design.

Finishing without White-Base

Printing without a white plate will result in a translucent finish, making light-colored designs difficult to see.
If you want a transparent finish, we recommend processing without a white plate.

Printing without a white plate will result in a translucent finish,
making it difficult to see light-colored designs.

Gloss Coating

One Side Print

If not specified, the entire design will be covered.
If you wish to specify the area to be gloss processed, please prepare a gloss layer.
*Normally, clear acrylic is printed from the reverse side, but in the case of gloss processing, we will print from the front side even on clear acrylic.

Both Side Print

①Acrylic ②Design of the FRONT side ③White base, ④Design of on the BACK side and ⑤Gloss cover are printed, so the back side will have a glossy finish.
There is a possibility that minute air bubbles may appear in the finished product. Please understand in advance that it is difficult to prevent bubbles completely in the process.

One-Side Print

Both-Side Print

①ACRYLIC ②DESIGN(Front) ③WHITE ④DESIGN(Back) ⑤GLOSS

Both Side Print

We offer double-sided printing (3-layer printing) for clear acrylic only.
Three layers are printed on one side in the following order: color, white, and color.
The print on the front side is visible through the acrylic.
Please create the design data so that the design on the front side and the back side overlap exactly when reversed. Please be careful to place text, logos, etc. so that they are readable when viewed from each side.
(*Please note that due to the nature of printers, there may be a 0.1mm gap between the print on the front and back sides.
*If there is a light-colored design or watermark, there is a possibility that the opposite side will show through.

Create the design data so that the design on the front and back sides overlap perfectly when they are reversed. Text, logos, etc. should be reversed and placed so that they are readable when viewed from each side.

Payment can be made by bank transfer.
Only for orders from overseas, we accept payment with PayPal.

If the product you receive does not meet your expectations, please read the following and contact us within 7 days of receipt of the product.
We will re-create the product or refund your money if the problem is caused by our defect.

Return Policy

Basically, Sagawa Express is the only shipping company.
The shipping fee is 1,000 yen per package (regardless of the product or quantity).
Second and subsequent delivery locations can be specified for an additional charge of 1,000 yen each.

If you have any questions, please feel free to contact us.

order@cornerprinting.com Contact Form