Colt Paterson Sunshield 5Panel Cap (#CP034)
This is a detachable sunshield cap with a 5 panel cap made of NYLON material.
The flat visor is single-stitched and wide, the sunshade is detachable, the top button has been eliminated, the stitching is modest overall, and the size adjustment is made with an adjuster-less elastic specification to create a sporty silhouette.
The single-stitched, wide, flat visor is based on US outdoor caps, and is easy to put on for town use, as it is neither shallow nor deep.
It can also be used as a stand-alone 5-panel cap since it is removable, and is recommended as a form not found in blank bodies.
Translated with www.DeepL.com/Translator (free version) [ Colt Paterson ] This is an original headwear brand produced by the staff of CORNER PRINTING, who have been involved in the production of many blank bodies. The aim is to develop basic products that are not found in ready-made products, with the premise of applying secondary processing such as printing and embroidery.
Height : 12cm
Brim length: 9.5cm
Brim width: 21cm
Head circumference (min - max): 58 - 61cm
Made in china
Sunshield Length: 13cm
Measured without the Sunshield.
*These figures are approximate and may vary by 0.5cm~1.0cm depending on the individual.
*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.
Price includes embroidery processing (tax included).
800 yen will be added for each additional embroidery.
This product can be converted to DTF Print.
・Change to DTF Print: Same price as Embroidery (after 2nd location + 800 yen)
*Please note that the amount may vary.
*Additional charges may be incurred for other designs, etc.
After placing your order, you will receive an e-mail from us.
◾️ Processing range
[ Embroidery ]
Front: W130mm x H60mm
Side: W50mm x H50mm
Sunshade: W80mm x H80mm *Possible on both sides, but must be placed above the sweatband.
[DTF print ]
Front: W100mm x H60mm
◾️ Sample processing size
[Embroidery ]
Front: W98mm × H55mm
[DTF print ]
Front: W55mm x H60mm
For more information, please refer to the following pages.
・Embroidery
・DTF Printing
◾️ Embroidery Glitter Sheet
For additional glitter sheets: +500 yen
Glitter sheets allow for extensive multi-colored, glossy markings that cannot be achieved with direct embroidery of glittery lame materials.
◾️Appliqué Embroidery (Reflector / PU Leather)
Appliqué Embroidery (Reflector / PU Leather) Additional: +¥1,000
(Additional ¥1,000 for each additional size)
Using reflective sheets (retroreflective materials that reflect light back toward the light source) or PU leather sheets allows for marking over a wider area than is possible with direct embroidery.
*The minimum line width around the perimeter of the reflector must be 2mm or more.
*The line width must be constant (for example, 2mm, it will be fixed at 2mm).
You do not need to have Illustrator or Photoshop software to submit design data.
Basically, Illustrator data, Photoshop data, JPEG, PNG, PDF, handwritten manuscripts, etc. are all acceptable.
If you are not familiar with file formats, please contact us.
Basically, large, full-size images are fine.