Country of Origin: China
Material: 100% Cotton, 18/- Count Jersey
Weight: 225 g/m² (6.6 oz)
Construction: Single-needle collar, round-body construction
Notes: *Made with cotton thread
*Unlike pigment dyeing, this fabric uses reactive dyes, resulting in excellent colorfastness and resistance to fading and color transfer.
*Due to the nature of dyed products, there may be slight variations in color tone and fit from piece to piece.
*Stock quantity may vary depending on the supplier and may be out of stock after your order is placed.

Price includes silk screen printing processing cost (tax included).
*Free of charge for 10 or more prints (1,900 yen will be added for 9 or less prints)
250 yen will be added for each additional edition (1 color or 1 location).

This product can be converted to Inkjet Print or Embroidery or DTF Print.
・Change to Inkjet Print: display price + 400 yen (after 2nd location + 600 yen)
・Change to Embroidery: display price + 600 yen (after 2nd location + 800 yen)
・Change to DTF Print: display price + 600 yen (after 2nd location + 800 yen)

*Please note that the amount may vary.
*Additional charges may be incurred for other designs, etc.

After placing your order, you will receive an e-mail from us.

For more information, please refer to the following pages.
・Silkscreen Printing
・Inkjet Printing
・Embroidery
・DTF Printing

Please choose from our standard inks.
250 yen will be added for each additional color.

If you wish to change the ink color for the same design, a color change fee of 900 yen per color will be added.
*The color change fee will be waived for a minimum of 10 sheets of each color per design.

For more information, please refer to the following pages.
Silkscreen Ink Colors

◾️ Inkjet print dark color treatment
Dark color treatment: +600 yen per spot

◾️ Embroidery Glitter Sheet
For additional glitter sheets: +500 yen
Glitter sheets allow for extensive multi-colored, glossy markings that cannot be achieved with direct embroidery of glittery lame materials.

◾️DTF Glitter Printing
To change to glitter print: Add ¥1,000 to the DTF print price.
*Glitter print is a special process using DTF technology.

◾️Appliqué Embroidery (Reflector / PU Leather)
Appliqué Embroidery (Reflector / PU Leather) Additional: +¥1,000
(Additional ¥1,000 for each additional size)

Using reflective sheets (retroreflective materials that reflect light back toward the light source) or PU leather sheets allows for marking over a wider area than is possible with direct embroidery.

*The minimum line width around the perimeter of the reflector must be 2mm or more.
*The line width must be constant (for example, 2mm, it will be fixed at 2mm).

◾️DTF Foil Printing
Changing to foil printing: Add ¥1,000 to the DTF print price.
*You can choose from two foil colors: gold or silver. Please specify your desired foil color when submitting your print.
*Foil printing is a special process using DTF.

All measurements in the size chart are taken with the item laid flat; however, there may be slight variations or individual differences depending on the product or production lot.
Additionally, for products where measurements are listed in inches (converted from the original), differences in measurement methods or individual variations may result in discrepancies of approximately 2.5 cm to 5 cm.
Please note that these measurements are for reference only, and we ask for your understanding regarding any discrepancies.

An additional charge (size up charge) will be added per piece for sizes XXL (2XL) and larger, and an additional 250 yen will be added to the listed price for each additional size.

You don’t need software like Illustrator or Photoshop to submit your design files.
Basically, we accept any format—including Illustrator files, Photoshop files, JPEGs, PNGs, PDFs, and hand-drawn sketches.
If you’re unsure about file formats, please feel free to contact us.
As long as the image is full-size and large enough, it should be fine.